Filter
Top Products
25
Recording on MDs
Synchro-recording With the
Audio Component of Your
Choice
(
Music Synchro-recording
) Z
The Music Synchro-recording allows you to automatically
synchronize recording on the MD recorder with the
playing of the selected ogram sour ce. The Track
Marking function, however, will differ according to the
program source. For details, see “Marking Track Numbers
While Recording” on page 23.
12345
678910
11 12 13 14 15
16 17 18 19 20
21 22 23 24 25
M.ACCESS
CONTINUE SHUFFLE PROGRAM
NAME CHAR
RM-DR1J
NUM
>25
MUSIC SYNC
1 Do steps 1 to 6 of “Recording on an MD” on page
18.
2 Press MUSIC SYNC.
The recorder changes to recording pause.
3 Start playing the program source.
Recording starts automatically.
To stop Music Synchro-recording
Press x.
Note
During Music Synchro-recording, Smart Space and Auto
Cut (page 22) will operate regardless of their setting.
Synchro-recording With a
Sony CD Player (CD
Synchro-recording) Z
When the recorder is connected to a Sony CD player or Hi-
Fi component system, you can easily copy the contents of
CDs to the MD using the recorder’s remote. As the same
remote operates both the MD recorder and the CD player
or CD player section of the component system, make sure
to place the MD recorder and the CD player as close
together as possible.
Note
• Some CD players do not allow you to synchronize CD
recording with the remote of the recorder. In this case,
use music synchro-recording on this page to synchronize
recording on the CD player and recorder.
• To operate the recorder and CD player, unplug from the
jacks of the recorder and remote and use the remote as
the wireless remote (page 16).
12345
678910
11 12 13 14 15
16 17 18 19 20
21 22 23 24 25
M.ACCESS
CONTINUE SHUFFLE PROGRAM
NAME CHAR
RM-DR1J
NUM
>25
CD SYNC
STANDBY
CD SYNC
START
CD SYNC
STOP
CD PLAYER
/
1 Turn on the mixer (amplifier) and the CD player, and
select CD on the mixer (amplifier).
2 Do steps 3 to 6 of “Recording on an MD” on page
18.
3 Insert a CD into the CD player and select the
playback mode (Shuffle Play, Program Play, etc.) on
the CD player.
4 Press CD-SYNC STANDBY.
The CD player changes to play standby and the MD
recorder changes to recording standby.
5 Press CD-SYNC START.
The recorder starts recording and the CD player starts
playing.
The track number and elapsed recording time of the
track appear in the display.
If the CD player doesn’t start playing
Some CD players may not respond when you press
CD-CYNC START. Press X on the CD player’s remote
instead to start playing on the CD player.