Filter
Top Products
33
Playing MDs
Creating Your Own Program
(Program Play)
You can pick out the tracks that you like and specify the
playback order in a program containing up to 25 tracks.
12345
678910
11 12 13 14 15
16 17 18 19 20
21 22 23 24 25
M.ACCESS
CONTINUE SHUFFLE PROGRAM
NAME CHAR
RM-DR1J
NUM
>
25
PROGRAM
CLEAR
>25
CONTINUE
NUMBER BUTTONS
DISPLAY
AMSCLEAR
MENU / NO
YES
MENU / NO
/
/
/
Programming the tracks
1 While the recorder is stopped, press MENU/NO
twice.
“Setup Menu” appears in the display.
2 Turn AMS (or press ./> repeatedly) until
“Program?” of “Setup Menu” appears, then press
AMS or YES.
3 Turn AMS (or press ./> repeatedly) until the
track number you want to add to the program
appears, then press AMS (or use the number
button(s) to enter the track directly).
3S 12m27s
/6 8 10 0/
Programmed track number
and track order
Number of
pro
g
rammed tracks
Total time of
pro
g
rammed pla
y
If you entered the wrong track number
Press m repeatedly until the wrong track number
flashes, then do step 3 above again or press CLEAR to
erase the track number.
To enter a track number over 26 Z
Use >25. For details, see page 29.
4 Repeat step 3 to enter other tracks.
The entered track is added to the location where the
“0” flashes.
Each time you enter a track, the total program time
appears in the display.
5 Press YES.
“Complete!” appears and the program is completed.
6 Turn AMS (or press ./> repeatedly) to select
“Play Mode,” then press AMS or YES.
7 Turn AMS (or press ./> repeatedly) to select
“Program,” then press AMS or YES (or press
PROGRAM after step 5 for the remote).
“PROGRAM” lights up at the display window.
8 Press 7 ( H ).
Program replay starts.
To stop Program Play
Press x.
To resume normal play
While the recorder is stopped, press CONTINUE in the
remote. “PROGRAM” at the display window turns off.
z The program remains even after Program Play ends or is
stopped
Press 7 to play from the beginning of the program
again. If the play is stopped, the program will not be
lost.
Notes:
• If the MD is ejected, the program will be lost.
• The display shows “— m — s” when the total playing
time of the program exceeds 255 minutes.
• “ProgramFull” appears when you try to program 26 th
track.
• The set program will be lost when you try record or edit
operation.
Checking the order of tracks in the
program
While the recorder is stopped and “PROGRAM” lights
up, press LEVEL/DISPLAY/CHAR (or DISPLAY)
repeatedly.
The first several tracks in the program appear in the
display.
z To see the rest of the program
After the first several tracks in the program appear by
the above procedure, turn AMS clockwise (or press
repeatedly).