Filter
Top Products
30
Playing MDs
Reserving the next track during play
(Next Track Play)
A desired one track can be reserved for the next track by
turning “Next Tr Play (Next Track Play)” of “Setup Menu”
to “On.”
1 Press MENU/NO twice during stop.
“Setup Menu” appears in the display.
2 Turn AMS (or press ./> repeatedly) to select
“Next Tr Play,” then press AMS or YES.
3 Turn AMS to select “On,” then press AMS or YES.
4 Press MENU/NO.
5 Press 7.
6 Press DISPLAY/LEVEL/CHAR until the reservation of
the next track to play appears.
6 3m28s
NextNo Name
Tr
7 Turn AMS (or press ./> repeatedly) to select a
track number to be reserved in the flashing track
number display, then press AMS. After reservation,
the flashing of the track number stops.
8 When the play of the track number reserved in step
7 starts, the flashing of the track number display
starts again. Repeat the operation in step 7 to
reserve the next track number.
Notes
• Tracks cannot be reserved when PLAY MODE is
PROGRAM, SHUFFLE, or M.ACCESS.
• The reserved track cannot be located by AMS.
If AMS is turned, the reserved track is canceled, a mode
is set to select a new reserved track.
Locating a Particular Point
in a Track
You can locate a particular point in a track during play or
play pause.
/
Locating a point while monitoring the
sound (Search)
Press down m/M during play.
You will hear intermittent playback as the disc goes
forward or in reverse.
When you reach the point you want, release the button.
Notes
• If the disc reaches the end while you’re pressing M, the
recorder stops.
• Tracks that are only a few seconds long may be too short
for monitoring. For such tracks, play the MD at normal
speed.
Locating a point by observing the time
indication (High speed search)
Press down m/M during play pause.
You won’t hear playback.
When you reach the point you want, release the button,
then press 7.
z When “- Over -“ appears in the display
The disc has reached the end while you’re pressing
M. Turn AMS counterclockwise (or press .) or
press m to go back.