Filter
Top Products
16
Getting Started
Hooking Up the Audio
Components
Hook up a mixer, CD player, DAT recorder, and other
components to the MD recorder. Be sure to turn off the
power of each component to do so.
Mixer
OUT IN
DIGITAL
OPTICAL OUT
DIGITAL
OPTICAL IN
DIGITAL
COAXILAL IN
DIGITAL
COAXILAL OUT
CD player or
DAT recorder,
MD recorder
Remote or
control
component
CD player or
DAT recorder,
MD recorder
To power outlet
ç : Flow of signal
z
When the remote is used as the wired remote
Use the supplied control S cable to connect the jack at
the front of the remote with the control jack of the
recorder.
When the recorder and remote are connected by the
control S cable, infrared rays are not emitted from the
remote and infrared rays are not received by the
recorder.
When the remote is used as the wireless remote,
unplug from the jack of the recorder and remote.
1 Prepare necessary connecting cables.
• Audio connecting cable (pin type)
White White
Left (L) Left (L)
Right (R) Right (R)
Red Red
• Optical Digital connector cable POC-15A
• Coaxial digital connecting cable VMC-10
• Control S cable (accessory)
(Mini-jack)
2 Connect.
xWhen connecting with mixer
Use audio connecting cords.
Connect a white pin with the white (L) jack and a red
pin with the red (R) jack. Be sure to securely plug
into the jacks during connection. If not, noise may
occur.
MD recorder Mixer
ANALOG(UNBAL)
OUT
IN
L
R
2TR
OUT
IN
L
R
Ç
Ç
ç : Flow of signal