Filter
Top Products
46
Editing Recorded MDs
Naming a Track or MD
(NAME)
You can enter a name for a recorded MD, as well as for
individual tracks. Names can consist of uppercase and
lowercase letters, numbers and symbols. A total number of
1,700 characters can be stored for all names on the MD.
MENU / NO
LEVEL / DISPLAY / CHAR
YES
AMSCLEAR /
12345
678910
11 12 13 14 15
16 17 18 19 20
21 22 23 24 25
-
M.ACCESS
CONTINUE SHUFFLE PROGRAM
NAME CHAR
RM-DR1J
NUM
>25
CLEAR
YES
NAME, CHAR, NUM
NENU / NO
LETTER/NUMBER
/
/
Notes
If you name a track while it is being recorded, be sure to
finish the naming operation before the track ends. If the
track ends before you finish, the entered character data
will be discarded and the tracks will remain unnamed.
Also, you can’t name tracks while the recorder is recording
over existing material.
Naming a Track or MD using the controls
on the recorder
1 Press MENU/NO while the recorder is stopped,
playing, or paused.
“Edit Menu” appears in the display.
2 Turn AMS until “Name?” appears in the display;
press AMS or YES.
3 Turn AMS until “Nm In?” appears, then press AMS
or YES.
When naming is being made during recording, the
cursor flashes and characters can be entered. Please
proceed to step 5.
4 Turn AMS until the track number (when naming a
track) to “Disc” (when naming the MD) flashes, then
press AMS or YES.
When the cursor flashes, characters can be entered. The
track number flashes, the track begins to play back
automatically so the track can be confirmed and the
track name entered.
Nm In Tr21
5 Press LEVEL/DISPLAY/CHAR repeatedly to select the
character type
To select Press repeatedly until
Uppercase letters “A” appears in the display
Lowercase letters “a” appears in the display
Numbers “0” appears in the display
Symbols* “
’
” appears in the display
*Symbols which can be used: ‘_/,.():!?&+<>_=”;#$%@
*
`
A
Nm In Tr21
To enter a space
Press M while the cursor is flashing. However, the first
character of the name cannot be a space.