Filter
Top Products
Chapter 6 Setup Menu
114 Chapter 6 Setup Menu
Extended Menu
Item number Item name Settings
Menu items in the 100s, relating to the control panels (continued)
118 KEY INHIBIT
SWITCH
EFFECTIVE AREA
Sub-item
Select which switches and buttons can be operated when the KEY INHIBIT switch on
the subsidiary control panel is set to ON. The following sub-items control different sets
of switches and buttons independently.
REMOTE
SELECT
Select whether the REMOTE button on the upper control panel is enabled.
DIS : Disabled.
ENA: Enabled.
1
CONTROL
PANEL
Select which switches and buttons on the control panel of this unit as well as the
external control panel connected to this unit are enabled.
DIS : All switches and buttons are disabled.
EDIT: All switches and buttons for editing operations are disabled.
ENA: All switches and buttons are enabled.
3
2
MON./ INPUT
SEL
Select whether the buttons in the input selection section on the upper control panel and
the MONITOR SELECT buttons on the lower control panel are enabled.
DIS : Disabled.
ENA: Enabled.
119 VARIABLE
SPEED LIMIT IN
KEY PANEL
CONTROL
Select whether to rewind the tape automatically when recording or playback reaches the
end of a tape.
DIS: Do not rewind the tape automatically.
ENA : Rewind the tape automatically.
125 AUTO REW
Select the playback speed range when carrying out playback in variable mode from the
control panel of this unit.
OFF : –1 to +2 times normal speed
ON: 0 to +1 times normal speed.
117
CONTROL PANEL
SELECTION
Select the control panel function when the CONTROL PANEL switch on the subsidiary
control panel is set to EXT.
SW : Only the control panel connected to the CONTROL PANEL control connector on
the connector panel functions.
PARA: Both the control panel connected to the CONTROL PANEL connector and the
control panel of this unit function.
116
JOG DIAL
RESPONSE
Select the tape speed characteristics for the search dial rotation rate in jog mode.
TYPE1 : Tape speed varies linearly over the range –1 to +1.
TYPE2: Tape speed varies stepwise as shown in the figure below
a)
over the range –3 to
+3. (Characterized by a zone around –1 and +1 where the tape speed is independent
of the rotation rate)
TYPE3: Tape speed varies linearly over the range –3 to +3, as shown in the figure
below
b)
.
a) b)
+3
+1
-1
-3
FWD
FWD
RVS
RVS
+3
-3
FWD
FWD
RVS
RVS
Speed
(reverse)
Rotation rate
TYPE 2 TYPE 3
Speed
Rotation rate
(Continued)