Filter
Top Products
56
<CRB3643-B/S>56
[Advanced
Sound
Retriever]
The Advanced Sound
Retriever function
provides a wide, deep
and rich quality to
CD/MP3/WMA/USB/
iPod sound, which
gives the user a lively
impression.
Establish the
Advanced Sound
Retriever mode by
touching either [Low
Rate] or [High Rate].
Touch [Off] to
deactivate the
Advanced Sound
Retriever.
NOTICE
The Advanced Sound
Retriever function can only be
selected when playing MP3/
WMA from CD and iPod, USB
portable audio player/USB
memory.
The Advanced Sound
Retriever function does not
support external compressed
audio media.
BASS function and TREBLE
function values can be set
for each of the modes (AM,
FM, CD/MP3/WMA, iPod/
USB portable audio player/
USB memory, XM Satellite
Radio, AUX). When you switch
modes, the settings change to
the BASS and TREBLE values
set for the selected mode.
The ASL function is only
effective when the vehicle is
moving.
•
•
•
•
Setting Up the Subwoofer
Touch [Sub-W] on the Sound
Settings menu to display the
Subwoofer Settings Menu and then
touch on the settings that follow to
set them up.
(This will only display when the sub-
woofer settings have been activated.
You can set this item, when the
[Subwoofer Setting] is set to [ON].
(page 54)) After the end of setup,
touch [OK] to return to the previous
screen.
[Phase] Establish the
Subwoofer Output
Phase mode by
touching either
[NORMAL] or
[REVERSE].
[Level
Adjustment]
Each time you touch
[+], the subwoofer
level steps increase
up to a maximum level
of 6.
Each time you touch
[–], the subwoofer
level steps decrease
down to a minimum
level of -24.
•