Scion PT546-00121 Stereo System User Manual


 
52
<CRB3643-B/S>52
Formatting/not formatting personal
data recorded on the system
After touching [Delete Personal
Data], touch either [Delete] or [Do
Not Delete]
[Delete]
Deletes personal data
that has been recorded in
the system as following:
- The source type that
was last played back
- The last volume setting
used
- Each setting value for
the radio source
- The preset content of
the radio source
- Each setting value for
the sound settings
- Each setting value for
the system settings
- Each setting value
for the contrast &
brightness
- Each setting value for
the Bluetooth settings
- The contacts, speed
dials and call history for
hands-free phoning
[Do Not
Delete]
Returns to the General
Settings menu without
deleting personal data
that has been recorded in
the system.
Setting Up Voice Guidance
Touch on [Voice] on the Setup menu
to display the Guidance Settings
menu. Next touch on the settings
that follow to establish them.
You can set this item, when the
microphone is connected.
Changing the voice output level.
Touch one of the following.
[1]-[7]
Establishes the voice
output level of Voice
Guidance. The lower the
setting number, the lower
the voice output level and
the higher the setting
number, the higher the
voice output level
Setting up/not setting up voice guid-
ance
After touching [Voice Guidance],
touch either [ON] or [OFF].
[ON] With this setting, Voice
Guidance is activated.
[OFF] With this setting,
Voice Guidance is not
activated.
Returning the Voice Guidance voice
output level to Level 4
Touch [Default].
Setting Up Bluetooth
Touch on [Bluetooth] on the Setup
menu to display the Bluetooth
Settings menu. Next touch on the
settings that follow to set them up
Connecting/disconnecting
registered Bluetooth devices
Touch on [Registered Bluetooth
Device] to display a list of the
Bluetooth devices that have been
registered. Touch one of the follow-
ing.
[Add New] Registers the
Bluetooth device.
[Remove] Excludes the selected
Bluetooth device from
the list.
[Detail] With this setting,
information regarding
the selected Bluetooth
device is displayed