Filter
Top Products
17
<CRB3643-B/S>17
Changing the Frequency
Manually
Touch [ ] and then, after chang-
ing the MULTI KNOB to Tune/Scroll
mode, turn the MULTI KNOB to the
right to increase the frequency and
to the left to decrease the frequency.
• If the volume fluctuates, touch [
] to change to the Tune/Scroll mode,
where you can change the frequency.
Searching for Frequencies That
Can Be Tuned In
Touch either [ ] or [ ] to search
in either ascending or descending
order for stations that can be tuned
in. When a station is detected, that
station will be tuned in.
If you press down on either of these
for 1.5 seconds or longer, even with
frequency loops, the SEEK function
continues to operate (Non-stop SEEK
function). If you release either during
operations of the Non-Stop SEEK
function, the SEEK function will take
over.
For FM, the PTY select function is
activated when the PTY genre is
established. However, when the
Non-Stop SEEK function is active,
the PTY selection function is can-
celled.
•
•
Listening to Preset Channels
Touch [Presets] to display the Preset
screen. Touch on any channel
from 1 to 6 on the Preset screen.
Frequencies recorded on the preset
channel will be tuned in.
Touch [>>] to switch the display to the
next preset page, and [<<] to switch
the display to the previous preset
page.
The pages change in the order of AM
FM1 FM2 SAT1 SAT2
SAT3 ( Return to AM). (SAT is only
displayed when the SAT unit is con-
nected.)
Recording the current frequency
on the preset channel
Touch any channel from 1 to 6 on
the Preset screen, continuing to
touch the channel for 1.7 seconds or
longer.
NOTICE
You can store up to 6 stations
per band.
Temporarily Muting the Sound
Touch [ ] to temporarily mute the
sound. Touch [
] to resume audio
output.
•
•
•
Searching for Frequencies That
Can be Tuned In (Only for FM/
HD Radio / XM Satellite Radio)
Touch [SCAN] to search for frequen-
cies that can be tuned in. Audio
output will be produced in 5-second
snippets for stations that have been
located. If you touch on [SCAN]
again during the time of the audio
output from the station you want to
listen to, that station will be tuned in.
When setting the PTY genre, audio
from stations applicable to the PTY
genre that has been set up is output
continuously in 5-second snippets. If
you again touch [SCAN], the broad-
cast being output will continue to be
tuned in and you will be able to select
a PTY genre. If you loop the search for
stations without touching [SCAN], a
beeping sound will be emitted and the
last radio station to be picked up will
be tuned in and then you will be able
to select a PTY genre (Only for XM
Satellite Radio). Audio broadcasts cor-
responding to the current categories
are continuously output in 5-second
snippets. If you touch [SCAN] again,
you will continue to receive the broad-
cast being output. If you loop the
detection of stations without touching
[SCAN], you will hear a beeping sound
and the last station to be received will
be tuned in.
•