Filter
Top Products
53
<CRB3643-B/S>53
Bluetooth Audio Player
Touch on [Connect Audio Player] to
display a list of the Bluetooth audio
players that have been registered.
Touch one of the following.
[Add New] Registers the
Bluetooth device.
Establishing the detailed Bluetooth
settings
Touch on [Detailed Bluetooth
Settings] on the Bluetooth Settings
menu and then touch on the settings
that follow to set them up
[Bluetooth
Power]
[ON] Turns the
Bluetooth
power on.
[OFF] Turns the
Bluetooth
power off.
[Passcode]
This enables you to
change the Passcode for
connecting the
Bluetooth device and the
Passkey. After touching,
enter a four-digit number
and touch [OK].
[Display
Audio
Player
Status]
[ON]
With this setting,
the current status
of the Bluetooth
Audio Player
connection is
displayed.
[OFF]
With this setting,
there is no
display of the
current status
of the Bluetooth
Audio Player
connection.
Connection Method
[ ] [Bluetooth] [Registered
Bluetooth device] [Details] []
Touch [Connection Method] and then touch
one of the following options:
[From Vehicle]: Start the connection
procedures using the system.
[From Audio Player]: Start the
connection procedures using the
Bluetooth audio device.
Connection procedures are normally
carried out automatically, but for
some Bluetooth audio devices, you
will need to change the connection.
For more information, see the
instruction manual for your Bluetooth
audio device.
Setting Up Audio
Touch [Audio] [External Video
Settings] on the Setup menu to
display the External Video Settings
menu and then touch on the settings
that follow to set them up.
You can set this item, when the VTR
is connected.
Converting external video signals
By touching either [NTSC] or [PAL],
you can covert video signals input
from external devices into either
NTSC or PAL.
Normally no conversion is necessary
other than for VTR viewing in the
PAL format.
•