Panasonic WJ-HD716K CD Player User Manual


  Open as PDF
of 156
 
80
[Resolution]
Select a resolution for images to be recorded.
Field: Standard resolution (704 x 240)
Frame 3D On: High resolution (704 x 480) with the
motion blur compensation function
Frame 3D Off: High resolution (704 x 480)
Default: Field
[MaximumRECrate](OnlyforHD716K)
Select the maximum recording rate that is available for each
channel.
The available values vary depending on the setting of
"Resolution".
• When"Frame3DOn"or"Frame3DOff"issetfor
"Resolution"
16ch-15 ips: Up to 15 ips can be set for each channel.
8ch-30 ips: Up to 30 ips can be set for each channel.
However, the cameras that can be used for recording
are restricted to 8.
• When"Field"issetfor"Resolution"
16ch-30 ips: Up to 30 ips can be set for each channel.
Select the following setting items for each recording mode
(manual recording, schedule recording, event recording, pre-
event recording and post-event recording).
On the first page, the setting items for CAM 1 to 4 are dis-
played.To display the other camera channels, select the
[Next page C] button.
■Manualrec./Schedulerec./Eventrec.
[Quality]
Select the image quality from the following.
XF(ExtraFine): Extra fine quality
SF (Super Fine): Super fine quality
FQ (Fine): High quality
NQ (Normal): Standard quality
EX(Extended): Low quality (Recording for a long period
of time)
Default: FQ
[Rate(ips)]
Default and available values differ depending on the setting
of "Resolution".
When "Off" is selected for a specified camera channel, imag-
es from a camera channel set to "Off" will not be recorded.
•When"Frame3DOn"or"Frame3DOff"isselected
for "Resolution"
Off/ 1.25ips/ 2.5ips/ 3.75ips/ 7.5ips/ 15ips (Only for
HD716K)
Default: 7.5ips (15ips for HD716K)
•When"Field"isselectedfor"Resolution"
Off/ 1.25ips/ 2.5ips/ 3.75ips/ 7.5ips/ 15ips/ 30ips (Only
for HD716K)
Default: 15ips (30ips for HD716K)
When "8 ch-30 ips" is selected for "Maximum REC Rate",
"30 ips" is available for "Rate".
[Pre-eventDuration]
Select the recording duration for the pre-event recording.
0s/2s/5s/10s/20s/30s/1min/3min/5min/10min/15min
Default: 0s
Note:
• Itmaybepossiblethattheactualrecordingwillbelon-
ger than the selected recording duration.
• Pre-eventrecordingisnotperformedwhen"0s"is
selected.
• Whenimagesaresettoberecordedtogetherwith
audio, the audio may not be recorded at the beginning
of the pre-event recording.
[Post-eventDuration]
Select the recording duration at an alarm occurrence (post-
event recording duration).
2s/5s/10s/20s/30s/1min/3min/5min/10min/15min
Manual: Recording duration will be as follows depending on
the alarm type.
Videomotiondetection(VMD): Recording will be per-
formed for 8 seconds.
At a video loss occurrence: Recording will be per-
formed during a video loss occurrence
Terminal alarm: Recording will be performed while the
terminal alarm signal is being supplied.
Camera site alarm: Recording will be performed for 8
seconds.
Con.(Continue): Record until the ALARM RESET button is
pressed
[Back]button
Closes the "Program setup" page and returns to the [Time
table] tab.
 previous next