Panasonic WJ-HD716K CD Player User Manual


  Open as PDF
of 156
 
59
!1[Maintenance]button
Select this button to display the "Maintenance" page (+
page 119).
Check and setup of the hard disk drive information of
the recorder, management of the setup data and check
of log information can be carried out on the
"Maintenance" page. Formatting SD memory cards and
displaying the disk configuration page can also be car-
ried out on the "Maintenance" page.
!2[Exit]button
Exits the setup menu when finishing the operation of
setup menu. The settings will be applied.
!33 Setup page
Displays each setup page. There are tabs for some
setup pages.
How to operate the setup menu
The settings required to operate the recorder are configured on the setup menu in advance.
The setup menu is displayed on Monitor 2.
Note:
• Thesetupmenucanalsobedisplayedbyholdingdownthe[SETUP/ESC]button(formorethan2seconds)onthefront
panel of the recorder.
• Atthestartupofthesetupmenuforthefirsttime,"Quick"pagewillbedisplayedasthetoppageofthesetupmenu.
After operating the recorder on the "Quick" page or each setup page, the "Basic" page (+ page 65) will be displayed as the
top page of the setup menu from the next time.
Operation using buttons on the front cover
Step 1
Display the setup menu.
Display the sub menu by pressing the [SUB
MENU] button, move the cursor to "Setup
Menu", and press the [SET] button.
→ The setup menu window opens.
Note:
• Whileliveimagesarebeingdisplayed,holddownthe
[SETUP/ESC] button for more than 2 seconds.
Operation using a mouse connected to the recorder
Step 1
Display the setup menu.
Click "S.Menu" on the status bar below the screen, and click
"Setup Menu" on the "Sub Menu" window.
SUB
MENU
➜
 previous next