Panasonic WJ-HD716K CD Player User Manual


  Open as PDF
of 156
 
136
Auto recognition of hard disk drives
When installing an HDD unit while the power of the recorder is on, the hard disk drive recognition process will automatically start.
During the hard disk drive recognition process, the HDD indicator (STS (status)) on the front panel will blink orange.
When an unformatted hard disk drive is installed
Format of the hard disk drive will automatically start. When formatting of the hard disk drive is completed, the HDD indicator (STS
(status)) on the front panel will light green and the hard disk drive will become recordable.
After the format, the hard disk drive will become a normal recording area.
When a formatted hard disk drive is installed
The installed hard disk drive will be recognized as a playback-only disk.
The HDD indicator (STS (status)) on the front panel will blink green.
Important:
• Itisimpossibletoadd(install)anHDDunitwhentherecorderisrunningwiththeRAIDfunction.Itisalsoimpossibletostart
the RAID function even by adding an HDD unit in a blank slot.
Note:
• TheHDDindicator(STS(status))sometimesmaylightgreenbeforeblinkingorangewhenaharddiskdriveisinserted.
 previous next