Panasonic WJ-HD716K CD Player User Manual


  Open as PDF
of 156
 
100
[IPaddress]
When "Off" is selected for "DHCP", enter an IP address.
Enter 4 units from the decimal numbers (0-255).
Default: 192.168.0.250
[Subnetmask]
Enter a subnet mask according to the network environment
when "Off" is selected for "DHCP". Enter 4 units from the
decimal numbers (0-255).
Default: 255.255.255.0
[Defaultgateway]
Enter the IP address of the gateway according to the net-
work environment when "Off" is selected for "DHCP". Enter
4 units from the decimal numbers (0-255).
Default: 192.168.0.1
[Linespeed]
Specify the line speed for data transmission.
Auto: Line speed will be applied automatically.
10M-Half: 10 Mbps half-duplex
10M-Full: 10 Mbps full-duplex
100M-Half: 100 Mbps half-duplex
100M-Full: 100 Mbps full-duplex
Default: Auto
■Maintenanceport
The setting for the maintenance port behind the front cover
of the recorder is configured.
This setting is required to maintain and support the recorder
from a PC connected via a network using the maintenance
port.
[IPaddress]
When "Off" is selected for "DHCP", enter an IP address.
Enter 4 units from the decimal numbers (0-255).
Default: 192.168.2.250
[Subnetmask]
Enter a subnet mask according to the network environment
when "Off" is selected for "DHCP". Enter 4 units from the
decimal numbers (0-255).
Default: 255.255.255.0
Important:
• Thesettingsof"NetworkPort"and"MaintenancePort"
should be on a different subnet.
[Linespeed]
Displays the line speed for data transmission.
It is impossible to change the setting value.
 previous next