Panasonic WJ-HD716K CD Player User Manual


  Open as PDF
of 156
 
140
About the error log
The following are the descriptions about the contents of the error log and the network log.
• "x"indicatestheextensionunitnumber.
• "y"indicatestheHDDunitnumber.
Content Error log Network Log Display on
Monitor2
Output from the
connector at
the rear panel
Outage detection POWER LOSS – POWER Error + Outage
processing end*
Recover from a power out-
age
POWER RECOVERED – – –
Alteration detection ALTERED **CH – ALT–*
(*: camera ch)
Error
No response from an
address of Panasonic
alarm protocol
PANASONIC_ALM_RES_ERR – – –
Failed to resolve a address
of Panasonic alarm proto-
col from DNS
PANASONIC_ALM_ADD_ERR – – –
Other error for an address
of Panasonic alarm proto-
col
PANASONIC_ALM_OTHER_
ERR
– – –
Parameter initialization
error
– – – –
FAN warning Recorder: MAIN FANy ERROR
Extension unit: EXTx FANy
ERROR
– FAN Error
Thermal error warning Recorder: MAIN THERMAL
ERROR
Extension unit: EXTx THERMAL
ERROR
– THERMAL Error
Reboot by the system
error
SYSTEM REBOOT – – –
HDD remove error (proper-
ly recognized HDD was
removed without opera-
tions on the front panel)
Recorder: MAIN-y SWAP
WARNING
Extension unit: EXTx-y SWAP
WARNING
– SWAP_ERR HDD error
HDD write error •PerHDD(Inthesinglemode)
Recorder: MAIN-y WRITE
ERROR
Extension unit: EXTx-y WRITE
ERROR
•Perunit(intheRAID5or
RAID 6 mode)
Recorder: MAIN WRITE ERROR
Extension unit: EXTx WRITE
ERROR
– – –
HDD read error •PerHDD(Inthesinglemode)
Recorder: MAIN-y READ
ERROR
Extension unit: EXTx-y READ
ERROR
•Perunit(intheRAID5or
RAID 6 mode)
Recorder: MAIN READ ERROR
Extension unit: EXTx READ
ERROR
– – –
 previous next