Panasonic WJ-HD716K CD Player User Manual


  Open as PDF
of 156
 
132
Step 4
Select the hard disk drive on which the pre-event recording
area is to be created (or added) and select the [Set] button.
Step 5
Select the desired camera channel for the selected hard disk
drive, and enter the capacity to be assigned.
• Pre-eventrecordingareasforupto16camerachannels
can be created on a single hard disk drive.
• Itisimpossibletoselectthecamerachannelssetfor
existing pre-event recording areas for other hard disk
drives.
• Enterthevalue15GBorgreaterforpre-eventrecording
areas for each camera channel.
When it is unnecessary to assign the capacity, enter "0".
Step 6
Select the [Format] button.
→ Format will start. When the format ends, the result will be
displayed.
Note:
• Capacitiesdisplayedforpre-eventrecordingareasmay
be smaller than the set value.
 previous next