Filter
Top Products
134
Step 3
Select the hard disk drive to be shut down, and select the
[OK] button.
When the hard disk drive on the recorder is to be shut down:
Main-y ("y" indicates the hard disk drive number.)
When the hard disk drive on the extension unit is to be
added to the system: Ext.x-y ("x" indicates the unit
number and "y" indicates the hard disk drive number.)
→ When the shutdown process is complete, the HDD indi-
cator (STS (status)) on the front panel will go off.
Note:
• Whentheshutdownprocessoftheharddiskdriveon
which recording is being performed starts, recording will
continue on another hard disk drive. Images may some-
times not be recorded for several seconds when switch-
ing the hard disk drive for recording. If there is no record-
able hard disk drive in the recorder, recording will stop.
• WhenoperatingintheRAIDmode,itisimpossibleto
start the shutdown process.