Filter
Top Products
66
SNMP System Name
Enter from the keyboard.
SNMP System Location
Enter from the keyboard.
Click the [SET] button if all are adequately set.
The WJ-HD200 will restart, and you will be requested to
enter the URL as described earlier in Main Page and
Control Panel.
■ Switcher Setup SWITCHER
SETUP
This window specifies sequence setups only for WJ-HD200.
Browser's sequence is set up in the LIVE SEQUENCE
SETUP in page 71.
8 Common Setup (COMMON SETUP)
Start Display (START DISPLAY)
The image in the selected form will be displayed on the
monitor when the unit is turned on.
Single Image: CH 1 – CH 8
Quad Image: QUAD-A (including 1-4), QUAD-B
(including 5-8)
Multi Image: 9-SCREEN (including 1-8)
Sequence: SPOT SEQUENCE, MULTI SEQUENCE
Multi-screen Selection Mode (MULTI SELECT MODE)
When the [MULTI SCREEN SELECT] button on the front
panel is pressed, the monitor display will change as fol-
lows depending on the selection.
QUAD ONLY: QUAD-A → QUAD-B → QUAD-A
ALL: QUAD-A → QUAD-B → 9-SCREEN → QUAD-A
8 Multi-screen Sequence Setup
(MULTI SEQUENCE SETUP)
Sequence Timing (SEQUENCE TIMING)
INT: The preset time to the internal timer allows the
sequence to step forward.
EXT: SEQ IN signal to the rear panel allows the
sequence to step forward.
Auto Skip (AUTO SKIP)
ON: The sequence skips the step where no video is
input.
OFF: The sequence does not skip the step.
Click the button to open the Multi Sequence Setup window.
8 Spot-screen Sequence Setup
(SPOT SEQUENCE SETUP)
Sequence Timing (SEQUENCE TIMING)
INT: The preset time to the internal timer allows the
sequence to step forward.
EXT: SEQ IN signal to the rear panel allows the
sequence to step forward.
Auto Skip (AUTO SKIP)
ON: The sequence skips the step where no video is
input.
OFF: The sequence does not skip the step.
Click the button to open the Spot Sequence Setup window.
8 Camera View Setup (CAMERA VIEW SETUP)
Click the button to open the Camera View Setup window.
■ Multi Sequence Setup MULTI
SEQUENCE SETUP
8 Camera Channel (CAMERA CH)
1 - 8: The selected camera image will be displayed in
single spot mode.
QUAD A: Camera image 1 through 4 will be displayed
in quad-split mode.
QUAD B: Camera image 5 through 8 will be displayed
in quad-split mode.
8 Time (TIME)
Available duration: 2-30 S
Click the [SET] button if all are adequately set.