Filter
Top Products
32
2. Select either ON or OFF with the JogDial, and press the
JogDial.
The default is OFF.
ON: The buttons are password protected. The recorder
enters the button lock mode if neither a button nor
the JogDial is operated within a period of five min-
utes.
OFF: No password protection is applied.
3. Move the cursor to ALL→ or OPERATION→ with the
[D] or [C] button.
ALL: Allows both normal operations and setup opera-
tions.
OPERATION: Allows only normal operations. Setup
operations are not allowed.
4. Press the JogDial.
The preset password appears.
The default is “12345” for both ALL and OPERATION.
<New password setting>
5. Select a digit, rotating the JogDial.
6. Enter a number with the numeric button, and press the
JogDial.
The cursor moves one digit to the right.
7. Repeat step 5 and 6 until all digits are entered.
8. Press the [SETUP/ESC] button to confirm the entered
password.
Go back to step 3 if you have not yet set the OPERA-
TION password.
● Keylock Buzzer Setup KEYLOCK
BUZZ
1. Move the cursor to KEYLOCK BUZZ with the [D] or [C]
button.
2. Select either ON or OFF with the JogDial, and press the
JogDial.
The default is ON.
ON: Buzzer beeps when unauthorized access takes
place.
OFF: Buzzer does not sound.
● Skip Alarm Recall Setup
SKIP ALARM RECALL
Alarm log pages are recalled on the monitor when the
JogDial is pressed for 2 seconds. When searching in the
log, you may need to skip pages. The displayed page will
skip the specified number forward or backward when rotat-
ing the JogDial.
1. Move the cursor to SKIP ALM RECALL with the [D] or
[C] button, and press the JogDial.
2. Select the number of skip page with the JogDial, and
press the JogDial.
The default is 5 pages.
Available skip page: 5, 10, 15, 20, 25 pages
● Simultaneous Recording & Playback
SIMUL REC & PLAY
This setting specifies whether to allow simultaneous play-
back and recording. When the parameter is set to ON, the
default of the recording rate will be changed to 15 FPS.
1. Move the cursor to SIMUL REC&PLAY with the [D] or
[C] button.
2. Select on or off with the JogDial, and press the Jogdial.
The default is ON.
ON: Allows simultaneous recording and playback
including remote-access playback and FTP access.
The default recording rate is 15 FPS, and as the
highest rate is 30 FPS.
OFF: Places priority on recording triggered by pressing
the REC button or by an alarm input. Playback
including remote-access playback and FTP access
will be interrupted if recording starts. The default
recording rate is 15 FPS, and as the highest rate is
30 FPS.
Notes:
•A 30 FPS recording will decrease the rate to 15 FPS
when playback, remote-access playback, or FTP
access is carried out simultaneously with recording.
SYSTEM SETUP (1 OF 2)
PASSWORD LOCK OFF
ALL
→
*****
OPERATION
→
*****
KEYLOCK BUZZ ON
SKIP ALM-RECALL 5PAGE
SIMUL REC&PLAY ON
ALTER DETECT OFF
DISK END MODE CONTINUE
DISK END BUZZ ON
SYSTEM SETUP (1 OF 2)
PASSWORD LOCK OFF
ALL
→
*****
OPERATION
→
*****
KEYLOCK BUZZ ON
SKIP ALM-RECALL 5PAGE
SIMUL REC&PLAY ON
ALTER DETECT OFF
DISK END MODE CONTINUE
DISK END BUZZ ON