Filter
Top Products
22
● Displaying WJ-HD200 MAIN MENU
1. Confirm that the camera and peripherals are connected
correctly and securely.
2. Turn on the power switches of all system components.
3. Hold down the [STOP] button for 2 seconds. The WJ-
HD200 MAIN MENU appears.
● Buttons and Dials Used for Setup
[D up] button: Moves the cursor upwards in a menu, and
opens the previous menu page.
[C down] button: Moves the cursor downwards in a menu,
and opens the next menu page.
JogDial (Counter-clockwise): Decreases the parameter
value.
JogDial (Clockwise): Increases the parameter value.
JogDial (Pressing) SET: Validates the selection, and
moves the cursor to the right. When the selected item
has a O return symbol, pressing this will open the next
lower layer menu for more minute settings
[STOP SETUP/ESC] button (Pressing): Moves the cursor
to the left, or returns to the previous menu.
[STOP SETUP/ESC] button (Holding down): Opens the
setup menu, or escapes from it and switches back to
normal operation.
WJ-HD200 MAIN MENU
TIMER OFF
O
REC SETUPO
EXT REC SETUPO
DISPLAY SETUPO
SYSTEM SETUPO
ALARM SETUPO
COMMUNICATION SETUPO
SWITCHER SETUPO
SYSTEM INFORMATIONO
HDD
FULL
ERROR
N
ALARM
SERCH
STOP
PLAY MODE SELECT
SETUP
/ESC
PLAY
TIME&DATE
SEARCH
REC STOP
ALARM
RECALL
REC
PUSH— PAUSE
SET
Digital Disk Recorder WJ-HD200
● Closing WJ-HD200 MAIN MENU
1. Hold down the [STOP SETUP/ESC] button for 2 sec-
onds.
The setup menu disappears, and normal operation will
be available.
Note: A blackout screen may appear for about 2 sec-
onds until the camera image is displayed if you
changed the settings and closed the setup menu.