Filter
Top Products
40
4. Repeat step 1, 2, and 3 until all steps are programmed,
or press the [SETUP/ESC] button to return to the
SEQUENCE SETUP menu.
5. Move the cursor to SEQUENCE TIMING in the SEQ
SETUP menu.
Select INT or EXT with the JogDial, and press the
JogDial.
The default is INT.
INT: Forwards the step when the assigned time elaps-
es.
EXT: Forwards the step when the SEQ IN signal is input
to the rear panel.
6. Move the cursor to AUTO SKIP with the [D] or [C] but-
ton.
Select ON or OFF with the JogDial, and press the
JogDial.
The default is ON.
ON: The sequence skips the step where no video is
input.
OFF: The step will be displayed as a blackout screen.
● Spot Sequence Setup SPOT SEQ
SETUP
Open the SPOT SEQ SETUP menu to program the
sequence steps for displaying single input images.
1. Move the cursor to the desired step using the [D] or
[C] button.
2. Select a camera number with the JogDial, and press
the JogDial.
The default camera number is identical to the step num-
ber.
Available camera: From 1 to 8.
Note: The recorder will skip the step you assigned “–”.
3. Select duration for the step with the JogDial, and press
the JogDial.
Available duration: 2-30 S
4. Repeat step 1, 2, and 3 until all steps are programmed,
or press the [SETUP/ESC] button to return to the
SEQUENCE SETUP menu.
5. Procedures for SEQUENCE TIMING are the same as
step 5 in MULTI SEQ SETUP.
6. Procedures for AUTO SKIP are the same as step 6 in
MULTI SEQ SETUP.
● Camera View Setup CAMERA VIEW
SETUP
Open the CAMERA VIEW SETUP menu to program the live
image of each camera channel to display or veil on the
monitor.
1. Move the cursor to the desired camera using the [D] or
[C] button.
2. Select ON or OFF with the JogDial, and press the
JogDial.
The default is ON.
ON: Live image of the channel is displayed.
OFF: Blackout image is displayed.
3. Repeat step 1 and 2 until all channels are programmed,
or press the [SETUP/ESC] button to return to the
SWITCHER SETUP menu,
Notes:
• Recording will be carried out regardless of this set-
ting.
• The recorded images of the channel will be played
back and displayed on the monitor even if OFF is
selected.
→
→
→
→
→
→
→
→