Filter
Top Products
60
REC: Records the camera channel regardless of alarm-
activated or non-alarm status.
■ Manual Recording Setup
REC SETUP
Manual recording will take effect when OFF, neither INT nor
EXT, is selected in the Timer Mode Selection TIME REC
window. The parameters for alarm recording will be applied
except the scheduled time zone if INT is selected.
Click the REC SETUP button in the setup control panel to
open the window.
Refer to ● Recording Mode Setup PROG “1-4” NO. “1-4”
SETUP, for operating procedures and available parame-
ters.
■ Externally Specified Recording
Mode EXT REC SETUP
This window specifies the recording mode and parameters
that will be changed when externally connected switch to
EXT REC terminal is turned on.
Refer to ● Recording Mode Setup PROG “1-4” NO. “1-4”
SETUP, for operating procedures and available parame-
ters.
■ Display Setup DISPLAY SETUP
Time and date display and other displays of status informa-
tion are specified in this window.
8 Clock Setup (CLOCK SETUP)
Select a month, and type a day, year, hour, and minute.
8 Time and Date type (TIME&DATE)
TYPE1 24H: Time and date are displayed in one line in
the 24-hour system.
TYPE1 12H: Time and date are displayed in one line in
AM-PM system.
TYPE2 24H: Time and date are displayed in two lines in
the 24-hour system.
TYPE2 12H: Time and date are displayed in two lines in
the AM-PM system.
8 Time and Date Display (TIME&DATE DISPLAY)
ON: Time & date display is enabled.
OFF: Time & date display is disabled.
8 Time and Date Position (TIME&DATE POSITION)
Right-Lower: Displays time & date in the right lower
corner.
Right-Upper: Displays time & date in the right upper
corner.
Left-Lower: Displays time & date in the left lower cor-
ner.
Left-Upper: Displays time & date in the left upper cor-
ner.