Filter
Top Products
MR Configurator can monitor all the inputs and outputs of the MR-J3-T, including those on the
MR-J3-D01 I/O extension.
Procedure:
ቢ
Connect the PC/notebook to the USB port (CN5) of the servo amplifier using cable
MR-J3USBCBL3M.
ባ
Start MR Configurator and make the following selections:
– Select the MR-J3-T series amplifier.
– Select the MR-J3-D01 expansion card (“option unit”).
After this you canmonitor the signals oftheexpansion card withthe option
Option unit I/Fdisplay
in the
Monitor
menu.
Positioning with Digital Inputs Functional Test of Digital Input Positioning
MR-J3-T 4-29
Fig. 4-20: Settings in MR Configurator for checking the MR-J3-T with the MR-J3-D01
expansion card
Fig. 4-21: Selection of the “Option unit I/F display” terminal monitor option
ᕢ
ᕡ