Filter
Top Products
5 - 4 5 - 4
MELSEC-GOT
5 PRE-OPERATION SETTINGS AND PROCEDURE
Number Name Description
Used to set the number of occupied stations. (Factory setting:OFF(4 stations) )
Switch Position
Number
ON OFF
SW1 1 stations 4 stations
SW2 Must not be used
3)
Number of stations
occupied setting switch
21ON
Data link status can be conformed by the on/off statuses of the LEDs.
LED Name Description
L RUN LED
On:Indicates that communication is normal.
Off:Indicates a communication break (time excess error).
SD LED On:Indicates data transmission.
RD LED On:Indicates data receive.
L ERR.
LED
On: Indicates a communication data error (CRC error).
Flicker: Indicates that any switch (1 to 3) position was changed while
power is on.
Off: Indicates that communication is normal.
4)
Indicator LEDs
L ERR.
RD
SD
L RUN
5) Connector Connector for connection to the GOT
6) Module fixing screws Screws for installation to the GOT (M3 3 screw)
7)
Terminal block
DA
1357
2468
DG NC NC
DB SLD (FG1) NC
Terminal block for cable connection (M3 8 screw)
8) Rating plate ———