Filter
Top Products
4 - 11 4 - 11
MELSEC-GOT
4 MONITORING SPECIFICATION
4.4 Remote Register Allocation
The remote register allocation for GOT is described below.
The usage of the remote registers is different between the normal monitor method and
dedicated command monitor method.
The "m" and "n" in the table indicates the address allocated to the master module by
the station number setting.
(1) When the normal monitor method
The entire area is used for user region.
Addresses
Number of occupied stationsTransfer Direction
2 station 4 stations
Description Default Value
Master station GOT RWwm to RWwm+7 RWwm to RWwm+F User write area 0
GOT Master station RWrn to RWrn+7 RWrn to RWrn+F User read area 0
(2) When the dedicated command monitor method
The entire area is used for the GOT internal device communication commands.
Refer to Section 4.5 regarding each command for the GOT internal device
communication.
Addresses
Number of occupied stations
Transfer Direction
2 station 4 stations
Description Default Value
Master station GOT RWwm to RWwm+7 RWwm to RWwm+F
Command execution area
to be monitored by using
GOT internal device
0
GOT Master station RWrn to RWrn+7 RWrn to RWrn+F
Command response area
to be monitored by using
GOT internal device
0