Filter
Top Products
A - 2 A - 2
[Design Precautions]
!
CAUTION
•
Do not bundle control lines or communication cables with the main circuit, power or other lines
or lay them near these lines.
As a guideline, separate the cables at least 100mm(3.94inch).
Not doing so can cause misoperation due to noise.
[Mounting Precautions]
!
DANGER
•
Before mounting or dismounting the module to or from the GOT, always switch off GOT power
externally in all phases.
Not doing so can cause a module failure or misoperation.
!
CAUTION
•
Use this module in an environment that conforms to the general specifications given in the GOT
user's manual.
Not doing so can cause an electric shock, fire, misoperation, or product damage or deterioration.
•
When mounting the module to the GOT, tighten the module fixing screws within the specified
torque range.
Undertightening can cause a drop, short circuit or misoperation.
Overtightening can cause a drop, short circuit or misoperation due to damaged screws or module.
[Wiring Precautions]
!
DANGER
•
Before starting wiring work, always switch GOT power off externally in all phases.
Not doing so can cause an electric shock, product damage or misoperation.
!
CAUTION
•
When switching power on or starting operation after mounting, wiring or other work, always fit
the terminal cover supplied to the product.
Not doing so can cause an electric shock, short circuit or failure.
•
Always ground the FG terminal of the GOT power supply and the FG1 termial of this module to
the protective ground conducter.
Be sure to ground the GOT and this module separately.
Not doing so may cause an electric shock or misoperation.