IBM PS1500 Stereo Amplifier User Manual


 
2•10 User Guide
Rear Panel (Connections)
1. AUDIO/VIDEO INTERFACE
RGB: VIDEO OUTPUT IN RGB/Composite Video
STANDARD.
• SVHS: Video output in SVHS/Composite Video stand-
ard.
M
IC
/L
INE
I
N
: Audio Input for Microphone or Line signals
for sampling operations. The general volume of the sig-
nal is regulated with the front panel MIC/LINE control.
• G
AIN
: Controls the volume of the signal fed into the Mic/
Line Input.
2. COMPUTER
Serial port which permits PS1500 to be connected di-
rectly to a computer (Apple Macintosh or IBM PC and
compatibles.) Data interchange between PS1500 and
PC or Mac requires appropriate setting in Edit General.
3. MIDI
Standard MIDI interface used to control other MIDI in-
struments or to communicate with a Computer. IN: re-
ceives data from another instrument. OUT: transmits data
to another instrument. THRU: retransmits data received
at MIDI IN. MIDI cables are not supplied with the instru-
ment.
When using PS1500 on its own, these jacks do not re-
quire connection.
4. PEDALS
The Function assignable Pedal Group consisting of three
pedals is connected by means of the appropriate jack
connector. If your pedals do not appear to operate, check
that the Pedals cable is connected to this jack.
5. INPUT
Right/Mono - Left: Stereo Audio Inputs for a musical
instrument, cassette recorder or CD player. For mono
connections use the Right/Mono jack.
Volume Controls the level of the signals fed into the
Input jacks.
6. OUTPUT
Right/Mono - Left: Stereo Audio Outputs to listen to
the PS1500 sound through an external device such as a
mixer or audio amplifier. For Mono reproduction, use the
Right/Mono jack.
7. SPEAKERS (for PS1500 models with
Speakers box)
Connection for the internal speakers. Connect the cable
running from the speakers box to this jack.