Filter
Top Products
Quick guide 1•11
4. Press the UPPER 2 activator.
A second sound is introduced (String), lay-
ered with the first.
4
< ------------Layered sounds (Upp 1 & Upp 2)------------ >
UPPER 2
LOWER
UPPER 1
Selecting the Programmable Presets
LOWER
* * BUTTON DISABLED IN FULL MODE * *
Set SPLIT MODE in Easy Play/Split
5A
5B
LOWER
< -------Lower ------- >< ----- Upp 1 &/or Upp 2------- >
Split keyboard
5. Press the LOWER activator.
A: In the case of the GrandP Preset (F1), the
LOWER activator will be disabled because
this Preset recalls the Full keyboard mode.
B: If, in point 2 overleaf, you selected a dif-
ferent Preset, say Preset PnoStr (F2), the
keyboard mode recalled will be Split mode.
In this case, the LOWER activator will intro-
duce a third sound and the keyboard will be
divided with a Split Point at note F#3.
The LOWER keyboard plays a Sound over
the range A0 - F#3. The UPPER 1 and UP-
PER 2 sections are assigned to the range
G3 - C8.
Repeat steps 2 and 3 to make additional
changes.
Observations
Depending on the Preset selected, the keyboard
sound combinations will change and the keyboard
mode may change from Full to Split and vice
versa. The chord recognition mode may also
change from “Free” to “One finger” or “Fingered
1” or “Fingered 2”.
If Full mode is recalled, the Lower keyboard sec-
tion is automatically disabled for selection leav-
ing Upper 1 and Upper 2 only active for selection
or muting.
If Split mode is recalled, all three keyboard sec-
tions will be enabled for selection or muting.