Filter
Top Products
Quick guide 1•13
PLAY WITH EFFECTS OR BYPASS THEM
One or both effects buttons in the Digital Effect
section will be active (LED on), showing that the
current Preset is being processed by one or both
effect types (Reverb and/or Mod/Delay effect).
You can temporarily modify the way in which a
Preset is processed by changing the On/Off con-
figuration of the Reverbs and Effects buttons.
When the LEDs are on, the current Preset is be-
ing processed by the effects; when off, the re-
spective effect is bypassed.
Bypass
1. To bypass an effect, press an active button.
The LED of the button goes off, indicating
that the current Preset is no longer processed
by the relative Digital Effect.
To activate an effect
2. Press a deactivated button.
The LED of the button turns on to indicate
that the current Preset is processed by the
relative Digital Effect.
22 Reverbs and 22 Mod/Delays are available
and both Effects units are user-programma-
ble (See chapter 15, «Edit Effects»). How to
select the effects is discussed in chapter 9,
«Digital Effects».
Play with Effects or bypass them
1
DIGITAL EFFECTS
REVERB EFFECTS
2
DIGITAL EFFECTS
REVERB EFFECTS
DIGITAL EFFECTS
REVERB EFFECTS
DIGITAL EFFECTS
REVERB EFFECTS