IBM PS1500 Stereo Amplifier User Manual


 
1•16 User Guide
Transpose the instrument
TRANSPOSE THE INSTRUMENT (SEMI-
TONES)
If you would like to play a Song in a different key,
or a song is too high or too low for a singer or
other instrument, you can transpose PS1500 to
play the song in an easier key.
The TRANSPOSE +/– buttons allow real time
semitone adjustments (transpositions) of the
overall pitch (range ± 12 semitones = 1 octave).
1. Press TRANSPOSE+ to raise the pitch or TRANS-
POSE– to lower the pitch.
TRANSPOSE+ pressed once displays an in-
crease of +01.
TRANSPOSE– pressed once displays a de-
crease of –01:
Holding either button changes the value con-
tinually until +12 or –12 is reached.
The LED on one of the buttons will be on to
indicate that the instrument is currently in a
Transposed status (sharp
or flat
).
120 8btStd *********** Bk1: ORGAN3
GrandP 8BEAT Bk1: STRING TRANSPOSE=+01
120 8btStd *********** Bk1: ORGAN3
GrandP 8BEAT Bk1: STRING TRANSPOSE=-01
1
TRANSPOSE
TRANSPOSE
2
120 8btStd *********** Bk1: ORGAN3
GrandP 8BEAT Bk1: STRING TRANSPOSE= 00
TRANSPOSE
Clear the keyboard transpose setting
2. Press both TRANSPOSE buttons simultaneously.
The LED on the active button goes off and
the instrument’s normal pitch is restored.
The display shows the 0 setting for a few
seconds then returns to normal.
Note: Pressing both Transpose buttons at the
same time also provides a PANIC function. See
Edit MIDI.