Filter
Top Products
Sounds & Presets 4•15
CHANGING THE KEYBOARD MODE
The keyboard Sounds can be set to one of two
keyboard modes:
• Full Mode- The tracks Upper 1 and Upper 2
play across the entire keyboard range. The
Lower section is disabled for activation.
• Split Mode - The tracks Upper 1 and Upper
2 play to the right of the split point while the
Lower track plays to the left from the Split
point down. When Easy Play is off (LED off),
deactivating the Lower track assigns the Up-
per tracks to the entire keyboard. When Easy
Play is on (LED on), deactivating the Lower
track does not change the status of the Up-
per tracks (they remain assigned to the part
of the keyboard above the split point), while
Lower does not play.
The following example outlines how to select the
keyboard modes.
1. Press and hold EASY PLAY/SPLIT.
The display changes to the MODE/SPLIT
POINT window showing two parameters:
Mode and Split. The Mode parameter (which
determines the Full or Split modes) will al-
ready be selected (flashing).
2. If the Mode parameter is not selected (flashing),
press the corresponding Function button F1 or
F2.
Changing the Keyboard Mode
EASY PLAY
SPLIT
F1 F2 F3 F4 F5 F6 F7 F8
1/1 MODE/SPLIT POINT:
Mode=Full Split Point=F#3
2
1
< -----Upper 1 and/or Upper 2 -- >
< ------ Lower------>
SPLIT MODE (Split point (F#3)
< -------Full Keyboard (Upper 1 and/or Upper 2)------- >
FULL MODE