Filter
Top Products
Replacing an Existing CD-ROM Drive With a CD-Writer Plus 1-23
Chapter 1: Installing CD-
Writer Plus and Software
5B. Remove the CD-ROM drive from your computer. To do this, remove all
screws holding the CD-ROM drive in the bay and unplug all cables from
the back of the CD-ROM drive. As you unplug them, lay the cables aside
so they will be easy to find, since you will be plugging them into the CD-
Writer Plus drive later on. Then pull the drive out of the drive bay.
NOTE: You will not need to use the data cable that came with your CD-Writer
Plus drive. If you already have an audio cable to connect the drive to the sound
card, you will not need the one that came with the CD-Writer Plus.
6B. Look at the sides of the CD-ROM drive you removed. If it has rails or
mounting brackets attached to the sides, remove them from the CD-
ROM drive and attach them to the CD-Writer Plus.