Filter
Top Products
Recovering Your Data 10-5
Chapter 10: HP Disaster
Recovery
A DOS screen appears.
3. At the prompt, type
A:\README then press Enter.
The README.TXT appears.
4. After reading the text, press
Alt+F, then press X to exit the editor.
5. If a Windows Startup Diskette #2 was created (not all systems require the
creation of a second diskette), insert that diskette into your machine’s
3.5” boot floppy drive.
6. At the prompt, type
A:\RECOVER and press Enter. Your system files will
be copied from the diskette to your hard drive.
The following message should appear:
Please insert Disaster Recovery Disc #1 into your
HP CD-Writer Plus.
7. Insert DR Disc #1 into your HP CD-Writer Plus, then press Enter.
NOTE: If your Disaster Recovery Set consists of more than one disc, you will be
prompted to insert each of the discs in the order they were created.
The following message should appear:
Select the volume that you wish to recover.
Drive C: [Volume C Name]
Drive D: [Volume D Name]
NOTE: If you have only one drive, it will be automatically selected for recovery
and this screen will not be displayed.
WARNING: For Windows 95 or Windows 98—If you are testing
the Disaster
Recovery Set, the test is complete. Do not continue past this step. Please remove
the Windows Startup Disk from your floppy drive and restart your computer. If
you are recovering
your data, continue to step 8.
8. Select the volume that you wish to recover by highlighting the volume
using the Up and Down arrow keys, then pressing
Enter.
You will then be asked to confirm your selections before recovering your
information.
9. Press
Enter to confirm your selections.