Filter
Top Products
Operation
42
Signature 2.0
To change the Treble Cut setting, press the
Treble
button
k
, and note that the default setting will appear
in the on-screen display (Figure OSD-19) and the front
panel
Information Display
. Use the
‹
or
› Menu
Control
buttons
i
to change the setting to the desired
level.
Figure OSD-19
When you have completed the adjustment, press the
Treble
button
k
again to enter the setting and return
to normal operation.
Bass Boost
This setting enables you to temporarily change the
boost in low-frequency sounds as shown in the graph
in Appendix C. You may find this useful when the
program you are listening to appears to have weak bass
levels. When adjusting this control be careful not to
increase the bass boost to an excessive level which may
cause a “boomy” sound and decreased headroom in the
subwoofer channel.
To change the Bass Boost setting, press the
Bass
button
m
, and note that the default setting will appear
in the on-screen display (Figure OSD-20) and the front
panel
Information Display
. Use the
‹
or
› Menu
Control
buttons
i
to change the setting to the desired
level.
Treble Cut: -0 dB
Figure OSD-20
When you have completed the adjustment, press the
Bass
button
m
again to enter the setting and return
to normal operation.
Subwoofer Trim
This setting enables you to temporarily change the out-
put level of the subwoofer channel when the program
you are listening to appears to have a weak bass channel.
To change the Subwoofer Trim, press the
Sub
button
l
, and note that the default setting will appear in the
on-screen display (Figure OSD-21) and the front panel
Information Display
. Use the
‹
or
› Menu
Control
buttons
i
to change the setting to the desired
level.
Figure OSD-21
When you have completed the adjustment, press the
Sub
button
l
again to enter the setting and return to
normal operation.
Subwfr Trim: +0 dB
Bass Boost: +0 dB