Harman-Kardon HA160-0004-A Stereo Amplifier User Manual


 
Operation
50
Signature 2.0
The tuner will search upward through the FM band,
automatically examining each station to see if it is send-
ing RDS data and looking to see what the PTY is. When
the next FM station that meets the search criteria is
tuned, the scan will stop and the station will be tuned. If
no station is found that matches the desired PTY type
after a complete scan of the FM band, the tuner will
return to the last station tuned.
Tuner Menu
In addition to using the direct access controls described
above, it is possible to program the tuner functions
and enter presets using the
Tuner Menu
. This
enables you to quickly set the tuner memory, and it
is a method of tuner operation to consider during the
initial configuration of the 2.0.
The
Tuner Menu
also allows you to give FM stations
personalized names and Program Types even
if they do not transmit RDS data.
To reach the
Tuner Menu
, the tuner must first be
selected as the input source. Press the
Tuner
button
g
or select the tuner using the front panel
Source
Selectors 3
if the tuner is not already in use.
Press the
Menu
button
j
to display the
Setup
Menu
(Figure OSD-33). The
Tuner >
line will
be highlighted.
Figure OSD-33
Note that this line does not appear on the
Setup
Menu
(Figure OSD-1) when the tuner is not selected
as the input source. Press the
Menu Control
button
i
to display the
Tuner Menu
. The menu
will differ depending on the frequency band in use.
One menu will appear when an FM station is currently
Setup Menu
Tuner >
Record Outputs >
Sources >
Speaker Setup >
Advanced Setup >
tuned (Figure OSD-34), while a different, shorter menu
(Figure OSD-35) will appear when an AM station is
currently tuned.
Figure OSD-34
Figure OSD-35
The first line on both
Tuner Menu
screens is the
Preset
memory function. If a station currently
tuned already has been assigned a preset memory
location, a number will be shown on this line. While
this line is highlighted you may also change to another
preset station by pressing the
or
Menu Control
buttons
i
until the desired station is tuned. You may
also assign a new preset on this menu, but before doing
that it is necessary to proceed with the other entries on
this menu page and then return to the
PSet
line. When
you are finished with any change on this line, press the
¤ Menu Control
button
i
to move to the next line.
The
RDS
line enables you to determine if RDS data
will automatically be displayed when the tuner detects
RDS data on a station’s transmissions or to alternatively
display information manually entered using the
ID
and
Type
lines of this menu Press the
or
Menu
Control
buttons
i
to select from one of the
following choices.
Tuner Menu
PSet: 01
FREQ: 1070
BAND: AM
Tuner Menu
PSet: 01
FREQ: 89.9
Band: FM
RDS: Auto
ID: KXXX-FM
Type: PUBLIC
Type Search >