Filter
Top Products
Page 60
Page 61
SETTINGS Menus (Continued)
VIDEO Menu
OSD POPUP (Volume, Source, and Mode)
When enabled, a “pop-up” message appears on your TV any time
the volume (including mute or on-the-y trims), source, or
surround mode are changed. The OSD circuit in the DMC-1 is
not switched into the video path unless called up by an OSD
action. This allows for the best possible video reproduction
quality. When the OSD display activates, it is normal to
see a slight icker on the screen. This menu allows you
to choose which, if any features, are enabled for OSD
features after initial setup of the DMC-1.
Note: The OSD “pop-up” does not function on the
component video output. This is intentional, as we feel that
the OSD insertion circuitry will degrade the performace of
the component video circuitry due to the ultra wide bandwidth requirement for optimal component
video performace.
VIDEO DEFAULT
Select the video output where the “pop-up” text appears, either S or composite video, but not both.
The full OSD is not aected by this menu item, as it is available on both.
VID2/MON2 OUT
VID2: the VCR2/MON2 outputs can be used for recording to a second VCR. There is no OSD, and the
output is muted when VID2 is chosen as an input (to prevent feedback).
MON2: the VCR2/MON2 output becomes a second monitor output (with OSD) for another TV. It will
not mute when VID2 is chosen.
VIDEO DELAY
This adjustment is useful if you have an external video processor in your system. Video signals may
become delayed with respect to the audio signals. Although it is called Video Delay, it is actually a
delay adjustment of the audio signals relative to the video signals.
Use the remote’s joystick pad to adjust the delay in one millisecond steps. An equal amount of delay
time is added to all audio channels.
Note: The speakers keep their relative time delay settings which the DMC-1 calculates from the Speaker
Position Menu settings. The video delay is just added on top. Leave the video delay at zero if you do not have
an external video processor or if you detect any noticeable synchronization problems with dialogue.