Filter
Top Products
Page 58
Page 59
SETTINGS Menus (Continued)
SPEAKERS Menu - POSITION
This menu allows you to enter the distance from your listening
position to the various speakers. The DMC-1 will then automatically
adjust and correct the speaker delay times. The sound from each
speaker should arrive at the listener seated in the primary listening
position at the correct time. Please note that the best sound
stage and imaging will result from careful attention to this
parameter, especially for the FRONT speakers.
The procedure is as follows:
1) Measure (in feet and inches) how far each speaker is
away from the center listening position of your home
theater.
2) In the OSD menu, use the remote control joystick
arrow buttons to enter the distance in feet for each
speaker.
3) The DMC-1 automatically sets the appropriate
delays for each speaker so the sounds arrive at the
primary listening position at the correct time.
4) Use this table to record your speaker distance
measurements
SPEAKER POSITION DISTANCE
LEFT MAIN / SIDE
RIGHT MAIN / SIDE
CENTER SPEAKER
LEFT SURROUND
RIGHT SURROUND
LEFT SURROUND BACK
RIGHT SURROUND BACK
Speaker Placement Tip - There is no substitute for well placed speakers, especially in pairs and especially
in the main front (L,C,R) positions. If you can place the main speakers equidistant (at similar distances)
from the primary listening position, you will enjoy the most balanced sound levels from most points in
the room. The farther away or closer the left speaker is from the listener (when compared to the right
speaker), the more delay one will have over the other. Sitting nearest the speaker with a high degree of
delay does not sound natural. Read more about speaker placement tips in the “Speaker Placement Tips”
section.