Filter
Top Products
Page 28
Page 29
Connecting a VCR (Analog Audio and Composite Video)
This conguration shows a VCR connection where the audio output from the VCR is taken from the
analog outputs (Red and White RCA jacks) and video output is taken from the Composite Video
output (the Yellow RCA jack). If you plan to use the VCR for recording, you also must connect the
DMC-1’s VCR outputs into the VCR inputs.
This conguration allows the DMC-1 to route the output of the VCR into the TV or projector. If your
VCR has S-Video outputs, you may use that connection type in lieu of the Composite Video RCA jack
as shown in the connection diagram.
If you plan to record with your
VCR do not forget to connect
the VCR OUTPUTS from the
DMC-1 into the VCR’s inputs
1