Filter
Top Products
Page 48
Page 49
CLONE
This feature allows you to easily copy all of the commands and labels from one Emotiva remote (of
the same type) to another.
1) Set both remotes on a at surface, with their IR windows pointing towards each other, about 1
or 2 inches apart.
2) In the SETUP menu for both remotes, press CLONE and the display will change to show SEND,
RCV (receive) and EXIT.
3) Press SEND on the remote you want to copy from. Press DEVIC to only clone a single device, then
press the device button. Press ALL to clone all programming.
4) Press RCV on the remote you want to copy to.
5) When you are ready, press START on both remotes. It may take up to 1 minute to complete the
clone sequence so do not move the remotes during this time. The remote will ash “GOOD” if it has
successfully learned all the commands. If it ashes “FAIL,” then repeat this procedure.
6) Press MAIN to return to the main menu.