Filter
Top Products
Page 34
Page 35
Connecting an Amplier (ZONE 2)
This conguration shows the ZONE 2 connections to a 2-channel amplier. The output is a left and
right RCA connection. Zone 2 does not have the option of balanced XLR connections. Also note the
connection of the 12 VDC trigger to turn the amplier on.
Note - for this particular conguration (where the amplier is 5+2 channels), the channels intended for
Zone 2 must be able to have a separate turn-on command or the amplier will power up Zone 2 whenever
the MAIN zone is on. Alternatively, a second (separate) amplier can be used. See next page.