Filter
Top Products
Page 46
Page 47
4) To edit a FAV button, press FAV and select the button you want from the ve pages. Use PAGE or
FAV to change pages to nd the one you want. Go to step 5. (Read about FAV programming in the
subsequent paragraphs)
5) Press the button you want to edit and the rst character will ash.
6) Use the keypad to enter up to 5 characters. This is like using a telephone keypad to enter letters.
For example, if you press 1 a few times, it will step through A, B, C, 1. Press 2 for D, E, F and 2. The
number 0 has a selection of special characters from which to choose.
7) Press the JOYSTICK RIGHT to move on to the next character, or press JOYSTICK DOWN to delete
a character.
8) When nished, press the button next to the label you just edited. You can edit other buttons, or
press MAIN a few times to return to the main menu.
FAV
This mode allows you to enter your favorite TV and radio stations. Note that the following procedure
assumes you have already programmed your remote to operate your TV, radio tuner and other
equipment. The keypad must already be able to select channels on your TV or SAT, and any DMC-1
tuner presets.
Before using FAV mode, use the EDIT mode to change the labels in the FAV display to show your
station call signs or reminders. You can also delete the labels from unused buttons, or move all your
most favorite FAV labels to PAGE 1.
1) In the SETUP mode, select FAV.
2) Select the device, such as SAT, TV or EMO, to learn station commands from.
3) The FAV display will appear, and you can step through ve pages using PAGE or FAV.
4) Press a favorite channel button and the rst character will blink. Use the keypad to enter the
channel number. For channels below 10, you should enter a 0 (zero) rst. If you want, you can enter
a power button before entering the channel. Also, if your equipment needs it, you may have to enter
the ENT button after the channel is entered. If you want to add a short delay, press PAUSE (II). You
can add 0.2 seconds each time you press PAUSE.
5) When you have nished with one channel, press its button, and the label will reappear. Move on
to the next favorite channel and program it in the same way. Repeat this for all the channels and
devices. Press MAIN to return to the top menu.
6) Now, if you press the molded FAV button, the favorite channels appear in the display, and the
ones you programmed will take you to your favorite channel or radio station. If you programmed
in a power command, the TV or tuner will turn on rst.
7) The commands are sent in sequence, for example for channel 13, rst the 1 and then the 3 are
sent. Wait a few seconds before switching between favorites, or your TV may receive for example,
the 1 of one button and the 2 of the next.