Filter
Top Products
Page 56
Page 57
SETTINGS Menus (Continued)
SPEAKERS Menu - SIZE
This menu allows you to enter the size of your speakers. The bass
management of the DMC-1 will then automatically assign each speaker
a frequency range based on your preferences. For full range speakers
with low frequency capabilities, you will probably choose
LARGE. In the case that speakers are not capable of full range
duty, choosing the SMALL setting will engage a high pass
crossover point at the point which is chosen for the subwoofer.
When SMALL is chosen, the low frequency range is sent
to the subwoofer.
See pages 60 and 63 for more details on bass management
and information regarding the adjustment of the
bass management crossover point.
MAIN Speakers
Select LARGE for any speakers which are capable
of good bass performance. Frequency response will be
FULL RANGE.
Select SMALL for any speakers such as satellites with
5 or 6 inch woofers. They will then receive the higher
frequency range above the crossover point selected
for the subwoofer. Remember that if you are not
completely sure (or if you choose to play it safe at rst)
you can select this setting to get things started and see
how much (if anything) is missing from the audio signal
content in the MAIN speakers.
SIDE-AXIS Speakers
Select LARGE for any speakers which are capable of
good bass performance. Frequency response will be
FULL RANGE.
Select SMALL for any speakers such as satellites with 5
or 6 inch woofers. They will then receive the