Filter
Top Products
Serial Control Strings
65
Mi Series and Tango Audio Controllers
Command Messages (Cont.)
MSAOs Source All Off Command, where:
's' is the desired source (0-8)
Use ’0’ for system all off.
(Note: v7.02 or higher only)
Source All Off Occurred:
"MASOFFs,b8,b7,b6,b5,b4,b3,b2,b1"
where:
1)'s' denotes the source
2) Bitmask denotes the zones that have been
turned off
- or -
System All Off Occurred:
"MASOFF0"
denotes all zones have been turned off.
- or -
ERR
MSSCr,s Select Source, where:
1) 'r is the desired room, (1-64)
2) 's' is the desired source, (0-8):
0: no source selected
1-8: for sources 1 to 8
After turning on a zone, set the volume to an
appropriate volume to un-mute.
Source Status:
"MSCr,s"
where:
1)'r' denotes the room: 1-64
2)'s' denotes the source: 0-8,
0: no source selected
1-8: for sources 1 to 8 selected
- or -
ERR
MGSCr Get Source, where:
‘r’ is the desired room, (1-64)
Source Status:
"MSCr,s"
where:
1)'r' denotes the room: 1-64
2)'s' denotes the source: 0-8,
0: no source selected
1-8: for sources 1 to 8 selected
- or -
ERR
MSSRr,s Select SRS, where:
1) ‘r’ is the desired room, (1-64)
2) ‘s’ is the SRS state, valid values are:
0: Off
1: Bass Boost
2: SRS 3D
3: Focus
4: WOW
SRS Status:
"MSRr,s"
where:
1) 'r' denotes the room:1-64
2) 's' denotes the SRS state, values are:
0: Off
1: Bass Boost
2: SRS 3D
3: Focus
4: WOW
5: SRS not Available
- or -
ERR