Filter
Top Products
Serial Control Strings
69
Mi Series and Tango Audio Controllers
Command Messages (Cont.)
MSSTs,x Set Source State, where:
1)'s' is the desired source, (1-8)
2) 'x' is the desired state, (0-2)
2: Pause
1: On
0: Off
This command does not support internal Sir-
ius Tuner (1-2).
Source State Status:
"MSSTs,p[variable]"
where:
1) 's' is the source, valid values are 1-8
2) 'p' is the source state, valid values are:
0: Off
1: On
2: Paused
3) [variable] is a data string which varies with
the type of source:
0: undefined - p where:
1: AM/FM Tuner - b,m,fffff where:
'b' is the band:
1 = AM, 2 = FM
'm' is the mono/stereo status:
1 = mono, 0 = stereo
'f' is the currently tuned frequency
(if it is known)
2: CD Changer
3: DVD Player
4: Satellite Receiver
5: Audio Server
6: Other 1
20: Internal AM/FM Tuner-
b,m,s,fffff
where:
'b' is the band:
1 = AM, 2 = FM
'm' is the mono/stereo status:
1 = mono, 0 = stereo
's' is the seek/tune status:
1 = seek, 0 = tune
'f' is the currently tuned frequency
- or -
ERR
MCMDs,x, y Send Source Command, where:
1) 's' is the desired source, (1-8)
2) 'x' is the desired command index
3) 'y' is the play option for the Sirius internal
tuner only. Other source types will ignore.
(1=play, 0=browse)
Refer to MCMD - Command Codes on
page 79 for details.
ACK
or
Sirius Channel Number (Sirius Type Only)
"RSCHs'x'y'z"
where:
1) s' is the Sirius number (1-2)
2) 'x' is the Category number (0-99)
3) 'y' is the Channel number (3 digits)
4) 'z' is the Service ID (3 digits)
- or -
ERR