Filter
Top Products
Serial Control Strings
82
Mi Series and Tango Audio Controllers
Status Messages (Cont.)
MBALr,x Balance Status, where:
1) 'r' denotes the room, (1-64)
2) 'x' denotes the balance, (0-20)
0: balanced evenly
1..10: 100% ... 10% Left
11..20: 10% .. 100% Right
MPRVr,x Privacy Status, where:
1) 'r' denotes the room, (1-64)
2) 'x' denotes the privacy status, (0-1)
0: Off
1: On
MGSTr,v,bb,t,s,r,z,l,p General Status, where:
1) 'r' denotes the room, (1-64)
2) 'v' denotes the volume setting, (0-70, 101)
101 : Mute
70..0 : -70..0 dB
3) 'b' denotes the bass level, (0-20)
0: level
1..10: -10..-1 dB
11..20: 1..10 dB
4) 't' denotes the treble level, (0-20)
0: level
1..10: -10..-1 dB
11..20: 1..10 dB
5) 's' denotes the source, (1-8)
6) 'r' denotes the SRS state, (0-5)
0: Off
1: Bass Boost
2: SRS 3D
3: Focus
4: WOW
5: SRS not available for this room
7) 'z' denotes the Group ID, (0-32)
0: not connected to a zone
1..32: zone ID
8) 'l' denotes the balance, (0-20)
0: balanced equally
1..10: 100% … 10% Left
11..20: 10% … 100% Right
9) 'p' denotes the privacy status, (0-1)
0: Off
1: On
MRGSz,s,b8,b7,b6,
b5,b4,b3,b2,b1
Room Grouping Status, where:
1) 'z' is the group ID, (0-32)
0: no group ID - all rooms in selection are not in a grouping
1-32: group ID
2) 's' is the source the rooms are currently associated with
3) 'b8'…'b1' is a binary room selection bitmap where all rooms to be grouped have a
binary 1 in the room position. The most significant bit in 'b8' is for room 64 and the
least significant bit in 'b1' is for room 1.
Note: If none of the bits are set in the room selection bitmap, then the room grouping
has been removed.
MGRSs,b8,b7,b6,
b5,b4,b3,b2,b1
Source Grouping Status, where:
1) ‘s’ is the source who the rooms are listening to
2) ‘b8’…’b1’ is a binary room selection bitmap where all rooms listening to ‘s’ have a
binary 1 in the room position. The most significant bit in ‘b8’ is for room 64 and the
least significant bit in ‘b1’ is for room 1.