Filter
Top Products
Serial Control Strings
83
Mi Series and Tango Audio Controllers
Status Messages (Cont.)
MFAVr,s,f Favorite Status, where:
1) ‘r’ is the room, (1-64)
2) ‘s’ is the source, valid values are 1-8
3) ‘f’ is the direct tuning string; it can be from 0 to 7 characters long and is translated
as specified in the ‘Send Source Direct Data’ command: Zero length data is returned if
the favorite is not set.
MLOTb8,b7,b6,
b5,b4,b3,b2,b1
Lock Out Status, where:
‘b8’…’b1’ is a binary room selection bitmap where all rooms blocked out have a binary
1 in the room position. The most significant bit in ‘b8’ is for room 64 and the least
significant bit in ‘b1’ is for room 1.
MPRSs,n,p Preset Status, where:
1) ‘s’ is the source, valid values are 1-8
2) ‘n’ is the preset, valid values are 1-10
3) ‘p’ is the direct tuning string; it can be from 0 to 7 characters long and is translated
as specified in the ‘Send Source Direct Data’ command: Zero length data is returned if
no preset is set
MSTPs,t Source Type Status, where:
1) ‘s’ is the source, valid values are 1-8
2) ‘t’ is the source type, valid values are:
0: undefined
1: AM/FM Tuner
2: CD Changer
3: DVD Player
4: Satellite Receiver
5: Audio Server
6: Other 1
20: Internal AM/FM Tuner
MSSTs,p,x Source Status, where:
1) 's' is the source, (1-8)
2) 'p' is the source state, (0-5)
0: Off
1: On
2: Paused
3: Mute off (Sirius module only)
4: Mute on (Sirius module only)
5: Sleep on (Sirius module only)
3) 'x' is a variable lenth data string that varies with the type of source:
0: undefined - p where:
1: AM/FM Tuner - b,m,f where:
'b' is the band: 1 = AM, 2 = FM
'm' is the mono/stereo status: 1 = mono, 0 = stereo
'f' is the currently tuned frequency (if it is known) (5 digits max)
2: CD Changer - none
3: DVD Player - none
4: Satellite Receiver - none
5: Audio Server - none
6: Other 1 - none
7: Custom XM - none
8: Internal Sirius Tuner - none
20: Internal AM/FM Tuner- b,m,s,fffff where:
'b' is the band: 1 = AM, 2 = FM
'm' is the mono/stereo status: 1 = mono, 0 = stereo
's' is the seek/tune status: '1' = seek, '0' = tune
'f' is the currently tuned frequency (5 digits max)