Filter
Top Products
Setup and Configuration
27
Tango Series Audio Controllers
System Setup Mode screen
Select Setup from the Main Menu screen to access the System Setup Mode screen (FIG. 23):
Options on the System Setup Mode screen include:
MRC - Accesses the MRC Setup Mode screen, where you can program sources and adjust the
input attenuation & output gain for each source, as well as configure Paging.
Tuner - Accesses the Tuner Setup screens, where you can set the presets for each tuner detected.
Clock - Accesses the Clock Setup Mode screens, where you can set the time and view the alarms
that have been set for each room/zone.
Exit - Exits the System Setup Mode screen.
System Setup - MRC Setup Mode screen
Select MRC from the System Setup Mode screen (FIG. 23) to access the MRC Setup Mode screen (FIG. 24).
The options on this screen include:
Setup - Accesses the MRC Setup Mode Options screen where you can program sources and adjust
the input attenuation & output gain for each source.
Backlight - Accesses the MRC Backlight screen.
About - Accesses the About screen, which displays the firmware version of the Controller, Zone
Expanders and all connected keypads.
Exit - returns to the previous screen.
FIG. 23 System Setup Mode screen options
Exits this screen
To the Clock screens
To the Tuner screens
To the System Setup Mode screen
The acronym "MRC" stands for "Multi Room Controller", and refers to the Matrix
Audio Controller.
“Tuner” will only be displayed if a tuner module(s) is detected on board the Controller.
FIG. 24 MRC Setup Mode screen options
Exits this screen
To the About screens
To the Backlight screens
To the MRC Setup Mode screens