Filter
Top Products
Installation
11
Tango Series Audio Controllers
7. On the Main Controller, make the necessary NIC Port connections for the (optional) Network Interface
Card and AM/FM Antennas.
8. Connect the power supply and power up the units.
Zone Expander Addressing
Use the 7-position Address switch (FIG. 11) on the rear panel of the Tango Zone Expanders to set the Address
for each Expander, according to the values in the following tables:
DAS-T0808-SIG (8-Zone Controller)
Use the following table when connecting to DAS-T0808-SIG (8-Zone Controller):
DAS-T0804-SIG (4-Zone Controller)
Use the following table when connecting to DAS-T0804-SIG (4-Zone Controller):
Installing more than 2 pairs of speakers on any Zone output is not recommended
without installing an external amplifier.
Refer to the Tango Zone Expanders Installation Guide for additional details.
FIG. 11 Zone Expanders - 7-position Address Switch
Zone Expander Addressing - Connected to DAS-T0808-SIG (8-Zone Controller)
Zone Expander # DAS-T0804X-SIG (4 Zones) DAS-T0804X-SIG (8 Zones)
Zone Expander 1 Zones 9 – 12: set to Address 1 Zones 9 – 16: set to Address 1
Zone Expander 2 Zones 13 – 16: set to Address 2 Zones 17 – 24: set to Address 2
Zone Expander 3 Zones 17 – 20: set to Address 3 Zones 25 – 32: set to Address 3
Zone Expander 4 Zones 21 – 24: set to Address 4 Zones 33 – 40: set to Address 4
Zone Expander 5 Zones 25 – 28: set to Address 5 Zones 41 – 48: set to Address 5
Zone Expander 6 Zones 29 – 32: set to Address 6 Zones 49 – 56: set to Address 6
Zone Expander 7 Zones 33 – 36: set to Address 7 Zones 57 – 64: set to Address 7
Zone Expander Addressing - Connected to DAS-T0804-SIG (4-Zone Controller)
Zone Expander # DAS-T0804X-SIG (4 Zones) DAS-T0804X-SIG (8 Zones)
Zone Expander 1 Zones 5 – 8: set to Address 1 Zones 5 – 12: set to Address 1
Zone Expander 2 Zones 9 – 12: set to Address 2 Zones 13 – 20: set to Address 2
Zone Expander 3 Zones 13 – 16: set to Address 3 Zones 21 – 28: set to Address 3
Zone Expander 4 Zones 17 – 20: set to Address 4 Zones 29 – 36: set to Address 4
Zone Expander 5 Zones 21 – 24: set to Address 5 Zones 37 – 44: set to Address 5
Zone Expander 6 Zones 25 – 28: set to Address 6 Zones 45 – 52: set to Address 6
Zone Expander 7 Zones 29 – 32: set to Address 7 Zones 53 – 60: set to Address 7
Address 1