Filter
Top Products
Agilent N5161A/62A/81A/82A/83A MXG Signal Generators User’s Guide 79
5 Optimizing Performance
NOTE For the N5161A/62A the softkey menus and features mentioned in this guide are only
available through the Web–Enabled MXG or through SCPI commands. For information on the
Web-Enabled MXG, refer to the Installation Guide, the Programming Guide, and to the SCPI
Command Reference.
Before using this information, you should be familiar with the basic operation of the signal generator.
If you are not comfortable with functions such as setting the power level and frequency, refer to
Chapter 3, “Basic Operation,” on page 41 and familiarize yourself with the information in that
chapter.
• Using the Dual Power Meter Display on page 80
• Using Flatness Correction on page 88
• Using External Leveling (N5183A Only) on page 97
• Using Unleveled Operating Modes on page 105
• Using an Output Offset, Reference, or Multiplier on page 107
• Using Free Run, Step Dwell, and Timer Trigger on page 111
• Using LXI on page 113
• Using a USB Keyboard on page 119