Filter
Top Products
Agilent N5161A/62A/81A/82A/83A MXG Signal Generators User’s Guide 55
Preliminary Basic Operation
Preliminary Configuring a Swept Output
Figure 3-8 Frequency Marker Softkeys
Sweep > Configure Step Sweep >
More > Markers
Sets the frequency for the
marker number highlighted.
Up to 20 frequency markers
can be set.
Enables the selected
frequency marker.
Selects the highlighted marker
as the frequency reference
marker for the rest of the
frequency markers.
If the Delta Ref Set softkey
has been pressed, this softkey
enables the Marker Delta
function and uses the Ref
marker as the frequency
marker reference for the other
markers.
Sets the marker’s amplitude
value displayed on the
instrument (Range: –10 dB to
10 dB).
For details on each key, use key help
as described on page 42.
Sets the center frequency of
the sweep to the value of the
highlighted marker (row).
Sets the start frequency of the
sweep to the value of marker
1 (M1) and the stop frequency
to the value of marker 2 (M2).